gunsandwaffles.net

Paint. They’re missing paint. :bum:

I'm back at it after a week in Norway. But I've now also only got less than a week to go before the game.

Just a short night's work tonight given other commitments, but I did do the last model that hadn't as yet been started: the Malignant Plaguecaster.

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_16a.jpg[/img]

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_16b.jpg[/img]

It's an impressively intricate model, which my mere two photos don't do justice. It's definitely one to look at the full 360 degree images for [url=https://www.games-workshop.com/en-GB/Warhammer-40000-dark-imperium-eng-2017]here[/url]. In this case just a bit [i]too[/i] intricate as one of the three trailing strips of cloth had snapped off on the sprue (probably my fault from transit), but I managed to successfully glue it back on; that'll just be perpetually fragile and I'll have to just be careful with it.

It's such a busy model that I've made sure to use a base with no height to it, to prevent visual clashes.

So now that's [url=https://gunsandwaffles.net/forum/viewtopic.php?f=10&t=261]all six[/url] of Max's models ready to go, my [url=https://gunsandwaffles.net/forum/viewtopic.php?f=10&t=260]Nurgle Daemons[/url] are already done, and I've got two kill teams prepared (Tyranids for Max, Death Guard for me).

My next priority is to do the conversion of the Mabrothrax / Plague Elemental into a Spoilpox Scrivener, before the weekend.

That’s a whole lotta work you’ve done. It all looks great though. ;)

[quote=Dai post_id=2677 time=1536539297 user_id=60]DG - is that from the regular kit or one of the easybuild ones? Like him regardless. [/quote]From [url=https://www.games-workshop.com/en-GB/Death-Guard-Plague-Marines-2017]this box[/url] of seven Plague Marines. There are lots of weapon options in there. I assumed that the body parts would be swappable, but actually the components only go together in one way unless you convert them. So really it's more that you have seven independent models, each of which has at least two weapons configurations. Still, plenty of spares (heads and bellies, as well as weapons) for me to use to tart up other Chaos Space Marine models. And the detail on these guys is absolutely superb; I think the best Plague Marines ever in my opinion.


So what did I get done yesterday?

Well, the Chaos Lord now has his power fist pinned on and his backpack glued on. I've set a pin into the base, and this is what the whole thing looks like when assembled:

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_09a.jpg[/img]

The Chaos Lord isn't glued on, so that I can paint him separately from Melty McMeltface (who will be a Novamarine, by the way - easier then to pick out that his armour pattern matches the helmet in the power fist). I've also drilled and cratered a hole into Melty's left arm to explain why he can't use his lead bolter.

The diorama as a whole is a commentary on how white metal killed off lead models, of course. ;)


Also I fixed a piece of terrain that broke at our last game:

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_09b.jpg[/img]

That's actually a fish tank decoration that I deliberately chose to be reusable for wargaming when no longer needed for the fish. Plague Marine for scale.


And finally, two Poxwalkers assembled and pinned to bases, which completes the Death Guard kill team:

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_09c.jpg[/img]

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_09d.jpg[/img]


I'm now off to Norway for the week to work on-site with a client, so no more progress to be made until the weekend. But I'm in a great position, with only the following jobs yet to do:[list]
[*]Malignant Plaguecaster - currently still on sprue
[*]Spoilpox Scrivener - convert from Plague Elemental
[*]Shove barbed bracken onto every base
[/list]
And then I should be able to start painting. :eeek: I want to try a couple of test models (particularly to practise using sprays, which are a dark art to me). Then the priority is to base coat the Knight and Dreadnoughts so that I can stick their arms (and, in the case of the Knight, armour) on.

Knight's pose is smashing.

DG - is that from the regular kit or one of the easybuild ones? Like him regardless.

Poor melty marine...

A productive weekend! Yesterday, having finished the Knight's legs, I stuck the body on:

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_08a.jpg[/img]

That's held on with two pins at different angles, so it's a great sturdy bond. There is no more assembly to do for the Knight before painting. Just some filler needed (especially on the hip joints) to fill in some gaps between individual components.


I also put together the fifth and final Plague Marine member of the Death Guard kill team (two Poxwalkers still to go):

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_08b.jpg[/img]

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_08c.jpg[/img]

The Plague Belcher has a barrel with an ellipse-shaped cross-section, so I couldn't drill it out. Instead I carved it out using a craft knife before sticking the two halves of the barrel together.


And finally there's this guy:

I just wanted a Space Marine having a cool time, relaxing in the Garden of Nurgle.

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_08d.jpg[/img]

Nah, he's a scenic base for my Chaos Lord. You'll see him in position in the my post (because I've already completed that work today)...

The Knight's legs are finished! Yesterday I added all eight pistons (four for each foot, individually cut to length), the cables at the backs of the legs (carefully trimmed from the GW plastic legs), the bit of the waist piece that broke off in transit from Russia, and a panel at the back that I carved out from the plastic kit (because it looks better than the 3D-printed blocky design). Here are pics!

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_07a.jpg[/img]

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_07b.jpg[/img]

And a close-up of one of the legs, for the detail of the cabling:

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_07c.jpg[/img]

All I got done last night were the butt danglies (that's a technical term):

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_06.jpg[/img]

Just those four components took the whole evening to do, in terms of fitting, measuring, cutting and carving, bending, and gluing. The gluing was the worst as these are too small and awkward to pin, but don't fit smoothly (since they're made to go on the plastic legs at different angles) so I had to individually hold them one at a time until the glue had set.

Yes, one of them was pictured attached in the post above. But it fell off so I had to do all four in one evening.

Slow, but now that it's done also effective. I feared that I'd have to fashion scratch built pipes, but as you see I got the existing bits to fit quite nicely.

Sounds awfully fiddly mate but I think it'll be superb once you manage to get through all these tricky parts! :thumbsup:

Yesterday I experimentally tried sawing off a section of the plastic GW legs to get the joint casing, to see if I could practically use it to cover the gap I've left at the hips by putting the legs on the wrong way around. Here's an example of the bit I cut out (without having taken the effort of cutting out the centre section yet):

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_03a.jpg[/img]

In practice it looks worse with that on it than it does as is, so I'll not bother patching the gap with any component. Instead, if I think it needs covering, I'll add oozing slime or (more likely) corrosion to the offending area when I come to painting it.

So I continued on and finished off both arms, as well as a few more bits around the torso and legs:

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_03b.jpg[/img]

Here's a dry fit with the body just balanced on the legs for now, and the armour plates missing:

[img]http://nurgle.stelio.net/Flies and Dice/plog_2018_09_03c.jpg[/img]

Snagging jobs left to complete:[list]
[*]Pistons and cables at the hip joints. These will be fine for the straight leg, but the bent leg is far beyond the expected angle for the GW plastic kit, so I'm going to have to do some careful refitting of parts here. I might even need to convert the bits, possibly heavily.
[*]Pistons at the feet. Eight of these, four on each foot, need to be cut to length and then fitted to the ball joints on the feet. Probably going to be an awkward job, and I'll almost certainly have to cover up botched connections with corrosion and/or mud.
[*]Consider whether to include a dangling banner between the legs or not. The one that comes as standard is far too neat, so I'll rummage around to see if I've got a suitable replacement. Likely not, though, as my banner bitz are designed to be mounted on a pole sticking up, not hanging down from something.
[*]Glue the body to the legs at the waist. I plan to cut a piece to mount within the torso to help with stable positioning, which I'll pin into the groin.
[*]Set the angles of the weapons and head and then glue them into the correct final positions. Or would it be better to leave them articulated?
[/list]

Then I need to paint the superstructure and the armour plates separately before the very final assembly is complete.

I'm having an early night tonight, and I'm out role-playing tomorrow, so that's me done until Thursday evening.